the very best methods for roof covering insulation.

Roof covering insulation methods are separated into three categories: rigid board, non-rigid, as well as splashed polyurethane foam. Stiff boards are frequently made use of in low-slope assemblies, and some usual insulation products are polyisocyanurate, extruded polystyrene as well as mineral woollen. Non-rigid insulation is mainly made use of for attic spaces as well as pre-engineered buildings.

Cover boards are thin layers of insulation, such as timber fiber board, perlite, thick polyisocyanurate as well as glass-mat plaster. Cover boards are placed over the primary thermal insulation to improve its physical properties:

Boosted fire resistance
Compressive toughness
Protection from roofing system foot web traffic
Stopping blistering as well as contraction
Wind uplift resistance
Improved compatibility.

Cover boards are additionally used in reroofing to improve the application surface area. They cover joints between insulation boards, as well as give a splitting up layer in between the existing as well as new roofing system membrane layers.
Inflexible Insulation Boards

Stiff insulation boards, additionally called board-stock insulation, give sufficient compressive strength to sustain the roofing membrane layer and also its loads. Besides providing support for the roof covering membrane layer, rigid insulation likewise provides a consistent surface for membrane layer application and also enhanced hail resistance. Below is a listing of the typical types of rigid insulation boards readily available:

Perlite: An open-cell low R-value insulation made use of as a cover board, which offers excellent fire resistance but sheds compressive stamina when subjected to water. 1/2″ boards have a better percent of organic product compared to thicker boards. When hot asphalt is utilized it can create blistering, as well as consequently perlite is normally not suggested.

Polyisocyanurate: A high R-value plastic foam insulation used in low-slope roofings. It has a greater resistance to fire compared with polystyrene, yet this should be confirmed with producers if a thermal barrier is needed. Polyisocyanurate insulation constantly comes with facers, thin sheets on both faces, since they are required in the manufacturing procedure. When based on high web traffic, foam insulation can press and also facers can delaminate. Polyisocyanurate will certainly absorb dampness when subjected to a leakages. This triggers the insulation to shed its R-value, making a substitute essential, unlike polystyrene which can be reused. Note that polyisocyanurate is cheaper than extruded polystyrene.


Composite boards: Compound boards are made from two layers of various insulation types, which are laminated with each other in a factory. The main insulation is typically polyisocyanurate or EPS; and the 2nd layer can be perlite, plywood, timber fiberboard or gypsum board. Normally, the second layer will certainly be the leading surface of the board. Having a strong mechanical attachment in between both layers is crucial, or otherwise the secondary layer can diminish.

Polystyrene: There are 2 kinds of polystyrene insulation, expanded polystyrene (EPS) as well as extruded polystyrene (XPS), each with unique buildings. Polystyrene is a type of plastic foam, therefore it should be made use of with care in scenarios where warm roofing materials are utilized.

Enhanced Polystyrene (EPS): EPS is occasionally described as bead-board or shaped broadened polystyrene, and also it is a low-density product with modest R-value. EPS does not supply high water vapor resistance, and also will certainly break down when subjected to solvent-based adhesives and hot asphalt. If any one of these products is utilized, a cover board requires to be mounted over the insulation. Unlike various other plastic foam insulations, EPS will certainly not thermally age because its cells are full of air.
Extruded Polystyrene (XPS): Extruded polystyrene has a high R-value and great resistance versus water vapor. However, similar to EPS, it must not be revealed to warm asphalt, solvents or incredibly high temperatures. Compared with polyisocyanurate, XPS provides the possibility of reuse given that it does not take in water. XPS insulation likewise has a lower life process price than polyisocyanurate insulation.

Blanket, Batt, and Blown-In Insulation

This insulation is commonly utilized for attic spaces and roofings of pre-engineered steel buildings. Batt insulation is factory-cut into common sizes and also bundled without rolling, while covering insulation can be found in rolls. One of the most common material for batt and blanket insulation is fiberglass, which is additionally readily available as a blown-in item. Other products include mineral wool, which has greater compressive strength than fiberglass; and cellulose from recycled newsprint, which is available for blown-in insulation and can be treated to resist fire and also mold.

Splashed Polyurethane Foam Insulation

Sprayed polyurethane foam (SPF) insulation systems are self-adhering, two-component materials. They are directly related to roof decks, and can act as insulation and air obstacle when put on the bottom. SPF insulation is available in closed-cell or open-cell versions, with different levels of vapor permeability. It can be utilized by itself, or as a primary roofing system covering in mixes of safety finishings.

Now lets speak about a new method hyperdesmo.

Amazing roof covering waterproofing – Urban warmth islands and sustainable cities

Cool Roof Covering – HYPERDESMO

Trendy Roof – HYPERDESMOCool Roof Covering – HYPERDESMOCool Roof – HYPERDESMO

The sensation of urban heat islands is discovered in cities and describes the temperature level distinction between metropolitan and also backwoods which occasionally reaches up to 4 ° C. Researches point out that planet’s typical temperature will certainly enhance in between 2 and 4 levels Celsius within this century. One of the main reasons that contribute to this sensation, is the concrete infrastructure and also high density-materials located in city environments and which absorb greater quantities of warmth contrasted to rural areas. A vital aspect is the reduced solar reflectance of urban atmospheres which leads to the absorption of thermal power and is released later as warm in the environment.

In addition, using automobiles, air-condition units and also various other cause a more increase in the thermal energy exerted and also hence leading to temperature increases. Actually, making use of air-conditioning devices is one of the drivers of the worldwide growing energy need and also raises energy intake at an enormous range in the residential as well as industrial markets.

Great roofs

Roofings are among the most revealed frameworks in buildings soaking up a lot of warmth. In this regard, awesome roofs are thought about among the most lasting as well as affordable options to decrease warmth island result in cities and produce at the same time the appropriate thermal comfort in structures.

Amazing roofs is the term utilized for roof coverings that show over 65% of the sunlight’s rays contrasted to standard roofs which ward off less than 15%. Great roofs are able to repel warmth because the products used to coat them, use high solar reflectance.

Studies have actually revealed that the typical energy-saving effect of awesome roof coverings ranges from 15% to 35.7% in various weather areas as well as the average roofing surface area temperature level reduction is possible from 1.4 ˚C to as much as 4.7 ˚C.

The production of an amazing roof improves the power efficiency of buildings and also supports the advancement in city sustainability for cooler and also healthier environments with much better air high quality, alleviating the city warm island phenomenon.

So we have examined the best means for roofing insulation (μονωση ταρατσασ) and likewise we have spoken about cool roofing systems as well as hyperdesmo roofing insulation (μονώσεισ ταρατσών hyperdesmo ).